Henny Penny Wendy's Evolution Elite EEG-251, Руководство оператора

Страница: 76 / 90

Level
2
Programming
62
Menu Step Description
set the time (0 to 60 minutes) fryer stays idle before auto-idle is en-
abled. Ex., “30” means, if product is not cooked in that vat for 30 mi-
nutes, the control automatically cools the oil down to the idle set-point
temperature. Press the right arrow and “SP-7C” “IDLE SETPT”
flashes in the left display. Press the up or down arrow, or use the
product buttons, to set idle temperature 200°F to 375°F (93°C to 191°
C).
SP-8 Filter Tracking
Mode Filter Tracking signals the operator when the oil needs filtering by
counting the number of Cook Cycles between filters.
Press and release the right arrow until “SP-8” “FILTER TRACKING
MODE” shows in the display. Use the up or down arrow to choose ei-
ther “1.MIXED” filter tracking or “2.GLOBAL”.
NOTE:
• GLOBAL means all the products have the same number of cook
cycles between filters
• MIXED means each product may be set with different number of
cook cycles between filters. The controls add the cycle count (see
example below) and when the counts equal 1 or greater, filtering
is suggested. Ex., 1 load of fish. 2 loads of french fries, a load of
chicken equals 1. 1/2 + 1/8 + 1/8 + 1/4 = 1
Product No. Cook Cycles Cycle Count
Fish 2 1/2
French Fries 8 1/8
Chicken 4 1/4
M MIIX XE ED D
If MIXED is selected, press the right arrow and SP-8A” “SUGGEST
FILTER AT...” shows in the left display, and a value between 75%
and 100 % shows on the right display. Press the up or down arrow to
change this value. The lower the value, the sooner the control recom-
mends to filter. Ex: If set to 75%, the control suggest filtering after 3/4
of the programmed cook cycles must be completed before the control
suggest filtering. Press the right arrow and “SP-8B” “LOCKOUT EN-
ABLED?” shows in the left display. Press the up or down arrow to
choose “YES or “NO”. If set to “YES”, when controls suggest filtering,
“FILTER LOCKOUT”/“YOU *MUST* FILTER NOW”, shows in display;
more cook cycles are refused until vat is filtered. Press the right arrow
and “SP-8C” “FILTER LOCKOUT AT...” shows in left display and a
value between 100% and 250% shows on right display. Press the up
or down arrow to change this value. The lower the value, the sooner
the “lockout” occurs. Ex., If set at 100%, “lockout” occurs when the
cycle count reaches 1 or greater. Set at 200%, twice as many cycles
are counted before “lockout” occurs.
G
GL LO OB BA AL L
If GLOBAL is selected, press the right arrow.