Henny Penny Wendy's Evolution Elite EEG-251, Руководство оператора

Страница: 69 / 90

Product
Program
Mode
55
C Ch ha ap ptte err 5 5 P Prro od du ucctt P Prro og grra am m
M Mo od de e
This mode allows you to program the following:
• Change Product Name
• Assign Button
• Change Times & Temp
• Change Cook ID
• Alarms
• Quality Timers
• Include In Filter Count (Global)
• Filter After “X” Number Of Loads (Mixed)
• Load Compensation
• Load Compensation Reference
• Full Heat
• PC Factor
5 5..1 1 M Mo od diiffyyiin ng g P Prro od du ucctt S Se ettttiin ng gss
1 1))
Press and hold the program button until “PROG” shows in the display, followed
by “ENTER CODE”.
2 2))
Enter code 1, 2, 3 (first 3 product buttons). “PRODUCT” and “PROGRAM” show
in the displays, followed by “SELECT PRODUCT” and “-P 1-” (ex: NUG).
C Ch ha an ng ge e P Prro od du ucctt N Na am me ess
3 3))
Use the up or down arrow to scroll through the 40 products, or press the desired
product button.
4 4))
Press the right arrow and “NAME” shows in the left display and the product (ex:
NUGGETS) shows in the right display.
5 5))
Press “✓” button and the first letter in the name flashes. Press a product button
and the flashing letter changes to the first letter under the product button that
was pressed. For example, if product one is pressed, the flashing letter changes
to an “A”.
6 6))
Press the same button again and the flashing letter changes to a “B”. Press it
again and flashing letter changes to a “C”. Once the desired letter shows in
display, press the right arrow to continue to next letter and repeat the procedure.
7 7))
Press and hold the right “X” button to exit Program Mode, or press the right
arrow to continue on to “COOK TIME”.
A Assssiig gn n B Bu utttto on n