Henny Penny LVE-202, Техническое руководство

Страница: 87 / 115

Maintenance
75
5 5))
Support control panel bottom with one hand, swing panel top up about 90
degrees, slide panel down slightly to clear screw, push panel top up to engage
screw, then tighten screw.
7 7..2 22 2 F Fiilltte err & & JJIIB B L Liig gh httss
7 7..2 22 2..1 1 R Re ep plla acce em me en ntt
S SH HO OC CK K H HA AZ ZA AR RD D T To o a avvo oiid d e elle eccttrriicca all
ssh ho occkk,, m mo ovve e tth he e p po ow we err ssw wiittcch h tto o o offff a an nd d
d diisscco on nn ne ecctt m ma aiin n cciirrccu uiitt b brre ea akke err,, o orr u un n--
p pllu ug g cca arrd d a att w wa allll rre ecce ep ptta acclle e..
1 1))
Support control panel bottom with one hand, loosen retaining screw at panel
top, let panel slide down slightly to clear screw, push panel back up, then swing
panel top out and down.
2 2))
Locate wires to light and cut wires.
3 3))
Using a 3/16 inch deep-well socket, remove nut on back side of panel and pull
light from panel front.
4 4))
Install new light with deep-well socket, connect wires with wirenuts.
5 5))
Support control panel bottom with one hand, swing panel top up about 90
degrees, let panel slide down slightly to clear screw head, push panel top up to
engage screw, then tighten screw.
6 6))
Restore power to the unit.