Henny Penny LVE-202, Техническое руководство

Страница: 80 / 115

Maintenance
68
5 5))
Using crosshead screwdriver, remove the rear cover from motor, exposing the
wires.
6 6))
Loosen the conduit clamp, disconnect wires, and pull the wires through the
conduit clamp.
7 7))
Using 7/16 inch wrench, remove three nuts, lockwashers, flat washers, spacer
washer sets, and bolts securing the motor to the motor bracket.
8 8))
Pull the pump and motor assembly from fryer.
9 9))
Reinstall pump and motor assembly following the above steps in reverse order,
however, leave assembly mounting bolts and nuts loose and perform position
adjustment after all electrical and plumbing connections are made.
7 7..1 15 5..4 4 R Re ep plla acce e P Pu um mp p O On n M Mo otto orr
1 1))
Using a 1/2 inch wrench, remove two bolts securing the pump to the motor and
pull the pump from the motor.