Mobile Rope Measurement MSM 12
Henning GmbH
Page 11
2.0 / 3.2009
7.4.1
Save current rope loads
By pressing the "Save" button you can store the current individual rope loads and the
total load in the internal memory of the meter.
Figure 3: Saving of the rope loads
As soon as you use the "Yes" button the loads are stored in the meter. Using "No"
you will leave this menu item without storage.
It is possible to link an ID with this measurement in order to easier find the measure-
ment again. When pressing the button ID the display changes to the following view:
Figure 4: Assignment of the measurement ID
Here, you can assign any ID of maximum 16 digits. Complete your input with "Enter".
When pressing "ESC" you will leave the ID input without taking over the designation
already entered.
By means of the free of charge PC software the measurements can be read from the
load meter and be added in the form of PDF files or printouts to the elevator docu-
mentation. (Download of the software under http://www.henning-gmbh.de).
