Henkelman Atmoz 2-75, Руководство пользователя, Страница: 43 / 72

1. Set the value of Liquid Control to the maximum (99.8%) as described in Liquid Control
(optional) on page 42.
2. Enable Liquid . Use the cursor keys
▲
and
▼
to go to the value for Liquid and
press Enter.
3. Set the desired value using the cursor keys
▲
and
▼
and press Enter.
4. Press the cursor key
◄
to return to the menu.
5. Close the lid to start the vacuum cycle.
6.2.5.10 Red Meat (optional)
When packaging large pieces of fresh meat, the product continues to degas during the sealing
phase. Since the opening of the vacuum bag is already closed, air pockets may form inside the
package after decompressing. This function prevents these air pockets.
To set the Red Meat option, follow the steps below:
1. Press the cursor keys
◄
and
►
and select the program Red Meat.
2. Press Enter to open the menu.
3. If Red Meat is not enabled, enable it. Press Enter and use cursor key
▲
and
▼
to turn ON Red
Meat. Press Enter.
4. Use the cursor keys
▲
and
▼
to go to the value for the Ventilation Time and press Enter.
5. Set the desired value using the cursor keys
▲
and
▼
and press Enter.
6. Use the cursor keys
▲
and
▼
to go to the value for the Pause Time and press Enter.
7. Set the desired value using the cursor keys
▲
and
▼
and press Enter.
8. Press the cursor key
◄
to return to the menu.
9. Close the lid to start the vacuum cycle.
A Red Meat+ function is also available. It works the same as the function (see
(optional) on page 41).
6.2.5.11 Sequential Vacuum (optional)
The Sequential Vacuum option allows you to vacuum in up to 5 steps, alternating vacuuming steps
with maintaining periods. Each step increases the vacuum reached in the previous step.
To set the Sequential Vacuum option, follow the steps below:
1. Press the cursor keys
◄
and
►
and select the program Sequential Vacuum.
2. Press Enter to open the menu.
3. If Sequential Vacuum is not enabled, enable it. Press Enter and use the cursor keys
▲
and
▼
to turn ON Sequential Vacuum. Press Enter.
4. Use the cursor keys
▲
and
▼
to go to the value for the Vacuum 1 and press Enter.
5. Set the desired value using the cursor keys
▲
and
▼
and press Enter.
6. Use the cursor keys
▲
and
▼
to go to the value for the Time 1 and press Enter.
7. Set the desired value using the cursor keys
▲
and
▼
and press Enter.
8. Repeat steps 4 to 7 for the other Vacuum steps (2 to 5) and Times (2 to 5). At each Vacuum
step, the value must be higher than that of the previous step.
9. Press the cursor key
◄
to return to the menu.
Operation 43