Hendi 230442, Руководство пользователя

Страница: 10 / 144

10
EN
Mode Operation cycle Description
Inserve First water treatment
Backwash Second anti-current rinse
Brine & Slow Rinse Third regeneration with brine and slow
rinsing
Brine Refill Fourth filling the salt tank with water
Fast Rinse Fifth fast rinsing of the resin
Control panel in 230459 model
# Function Description
1 In serve water treatment, indicates water flow through the device;
2 Back wash regeneration reverse rinse of the resin;
3 Brine & slow rinse regeneration drawing of brine solution;
4 Brine refill filling water into the salt tank;
5 Fast rinse co-current rinse of the resin, brine rinse
6 clock indicates the current time;
7 key informs that all buttons are locked, in order to unlock the buttons simultaneously
press and hold for 5 seconds the up and down buttons. The keypad lock will be
automatically activated after 1 minute of inactivity;
8 settings change mode informs about controller settings change mode activated, in order to deactivate it
press button [10] (regeneration);
9 Enter entering settings change mode, settings change and confirmation
10 manual regeneration instant regeneration button, press in the service cycle to activate regeneration,
or move to another regeneration phase