Hendi 224038, Руководство пользователя

Страница: 7 / 76

7
EN
Troubleshooting
If the appliance does not function properly, please
check the below table for the solution. If you are still unable to solve the problem, please contact the
supplier/service provider.
Problems Possible cause Possible solution
The appliance does
not switch on. - Power plug is not connected properly
with the electrical outlet.
- Power switch (7) not set to position
I or II
- Check the power plug to make sure it
is connected properly.
- Set the power switch (7) to either po-
sition I or II.
The appliance stops
operation. - Internal thermal limiter activates to
avoid motor overheated
Turn the power switch to “0” position
and unplug the appliance. Let it cool
down completely for about 20 ~ 30 min-
utes before start up again.
Technical specification
Item no.: 224038
Operating voltage and frequency: 220- 240V~ 50/60Hz
Rated input power: 80W
Cup capacity: 0,75 ~ 1L
Protection class: class I Noise level < 70 dB (A)
Speed (rpm): Setting I : 7,500
Setting II : 15,000
Dimension: 170x170x(H)520mm
Net weight: approx. 3,6kg
Remark: Technical specification is subjected to change without prior notification.
Electric diagram
N
L
Fuse
Motor
Diode
Switch
Micro-switch
t°c