The center of the bar is obtained from the factory-preset value for Horizontal Position. At value=MIN, the selection of
+ positioning response might vary between XGA and SXGA panels. This is caused by physical limitations at MIN OSD
placement.
•
Vertical position—Enables the adjustment of the screen's vertical position using a slider bar.
The center of the bar is obtained from the factory-preset value for Vertical Position.
•
Clock—Enables the adjustment of the Horizontal Clocks using a slider bar.
•
Phase—Enables the adjustment of the analog signals phase using a slider bar.
•
Exit sub-menu—Enables exiting the menu.
Advanced
The Advanced option provides access to the following options:
• OSD settings menu
• Exit sub-menu
OSD settings
The OSD settings option provides access to the following options:
•
Lock OSD settings—Locks or unlocks the OSD settings.
•
Timeout—Displays a slider bar at the right side of the OSD display to enable the adjustment of OSD timeout. The
timeout ranges from 5 to 60 seconds with 1-second intervals. The default setting is 10 seconds.
•
V position—Enables the location of the OSD window to move up or down on the screen.
•
H position—Enables the location of the OSD window to move left or right on the screen.
•
Exit sub-menu—Provides option to exit current menu.
Factory settings
The Factory settings option enables the user to set the HPE LCD8500 back to its original factory settings. The following
options are available in the Factory settings menu list:
• Yes
• No
• Exit sub-menu
Language
The Language option allows the user to change the language in which the menu options are displayed. The following
languages are available:
• English
• French
• German
• Italian
• Japanese
Operational overview
16