HCA-60 PLAY
2x30W Mini Digital Amplifier with USB & BT
11
5.2. Microphone Priority
When you connect a microphone to the mini-jack input on front panel and start
talking, the system, regardless the operation mode in which you are (LINE, USB or
SD-Card), will mute all other sound and make you listen the voice only. If there is
no signal from the microphone for about 5 seconds, the system will restore the
original status of playing. Volume can be adjusted only in LINE mode.
5.3. BT Mode
1.
Press MODE button repeatedly until you reach BLUE mode.
2.
Be sure that BT function on your tablet, mobile phone, or other BT player is
active, and check a device named “Bluetooth audio player” in the list of avail
-
able devices (for further instructions. check your tablet/mobile phone/player
user guide).
3.
Once pairing is complete, you can play your music from your device with
excellent wireless transmission quality. Please also note that Play/Pause, Next,
and Previous buttons acts on your player, so if, for instance, you want to
temporarily pause your tablet, you can press the Play/Pause button on the
HCA-60 Play unit, and the music will stop.
5.4. USB-Drive Mode
Insert your USB-Drive in the slot on front panel, then press MODE button repeat
-
edly until you reach USB Mode. The display will show LOAD (loading). After 1 to 3
seconds the first song will automatically start playing:
Press PAUSE to pause playback.
5.5. SD-Card Mode
SD-Card has priority on all other sources. This means that it doesn’t matter which
source is playing (LINE, BT or USB), when you insert an SD-Card in the slot on rear
panel, the unit automatically switches to SD mode. This function could be very
useful if, for instance, you want your HCA-60 PLAY unit to automatically start play
-