1-02-2928-2
Original Parts:
01(55)53339431
01800 909 2020
01 (55) 53 33 94 00
Ext. 5068, 5815 y 5913
Thank you for choosing HELVEX products.
We are confident that the product reliability will exceed your highest expectations. The functionality,
aesthetics, durability are at its highest quality! The comprehensive support will grant full satisfaction for years,
reflecting our commitment to quality, innovation and the environment as part of Helvex.
To reduce the risk of injury or property damage, read all instructions. Before installing the product, please
remember to use safety glasses. In construction, installation, alteration, extension and repair, the rules of
constructions must be applied.
As result of continuous improvement, the product illustration may change in appearance.
Installation Requirements
Relation
Herramienta Incluida en su Producto
/ Tools Included in your Product
Herramienta Requerida
/ Required Tools
perico
llave inglesa
teflón
wrench
teflon
tape
adjustable
wrench
Instalación General
hot
Caliente
cold
Fría
*55 cm
(21,6”)
*20,3 cm
válvulas
angulares
NPT
(8”)
*Recommended
*Medidas Recomendadas
(Nivel de Piso Terminado)
(Finished Floor Level)
/ General Installation
1
Cierre el suministro de agua.
/ Close the water supply.
Ubique y cierre las válvulas de suministro de agua.
Generalmente se encuentran debajo del lavabo. Si se trata de un
reemplazo de grifo, quite el grifo viejo y limpie completamente la
superficie del lavabo.
Locate and close the water supply valve.
Usually found under the sink. If it is a replacement faucet, remove
the old faucet and clean the entire surface of the sink.
INSTALLATION GUIDE
01 800 890 0594
53 33 94 21
Technical Support:
WARNING
This installartion guide applies to the product in any finish.
angle
valves
Para el correcto funcionamiento de
este producto, la presión mínima
es de (
1.4
kg/cm²)
20
PSI.
U
E-9
43
Century
llave allen
llave de
mantenimiento
maintenance
tool
5/64"
5/64"
allen
wrench
Tall Single
Handle Batrhoom Sink Faucet
Max. flow rate 1.2 gpm
For the correct operation of this
product, the minimum pressure is
(
1.4
kg/cm²)
20
PSI.
