Hella Gutmann mega macs X, Быстрый старт

Страница: 55 / 496

Hella Gutmann Configuring the mega macs X | 5.
mega macs X 55
ð The name of the selected wireless network is displayed under Connected wireless network
ð
Use to call up detailed information about the connected wireless network.
10. Once the Wi-Fi symbol appears in the top toolbar, the online connection is set up between diagnostic device and
Internet.
ð You can use the Wi-Fi connection now.
5.1.1.2. Resetting the Wi-Fi Configuration
You can reset the Wi-Fi configuration if you wish to remove the automatic connection between diagnostic device and al-
ready created wireless network.
Proceed as follows to delete all known wireless networks:
1. Select > Settings .
2. Select >Device< .
3. Select >Wi-Fi< .
4. Select .
5. Click to >Reset Wi-Fi configuration< .
ð
The Wi-Fi configuration is reset.
5.1.2. Configuring the Ethernet
Make your network settings here.
Proceed as follows to connect the diagnostic device to a network (router) via Ethernet interface:
1. Plug in the Ethernet cable (not included in delivery contents) in the Ethernet ports of the mega macs X and the Ether-
net remote station.
2. Select > Settings .
3. Select >Device< .
4. Select >Ethernet< .
5. Open the list under IP address mode with .
ð If >Determine automatically (DHCP)< (recommended) is set, the DHCP server of the network will assign an IP
address to the mega macs X automatically. This option is set ex works.
ð If >Determine manually< is selected, enter a free network IP address, e.g.
192.168.246.002.
under IP ad-
dress .
6. Select >Determine automatically (DHCP)< (recommended) or >Determine manually< .
7. Click to >Connect< .
ð The selection will be saved automatically.
ð You can use the Ethernet connection now.