Q U I C K - S T A R T G U I D E
NOTE:
use of product constitutes acceptance of
warranty terms and conditions.
Important safety information
Observe the following during assembly and
operation to protect your device from damage:
•
Helios light panel may only be repaired by
authorized service personnel. Never open
the control box or light panel yourself.
Doing so invalidates the Warranty.
•
Only connect approved accessories.
•
Do not use the connected cable to lift your
Helios light panel, as damage to cable may
occur, which is not covered under warranty.
Instead use the notched areas provided
(located at the sides of the device, as shown
in the illustration below).
•
Only connect cables to the sockets and
connection ports intended
(reference
assembly instructions).
Observe the following during assembly
and operation to protect yourself from
personal injury.
•
To prevent the risk of electric shock:
– Do not submerge.
-
Never touch the power connector with
a sharp or metallic object.
-
Never connect or disconnect cables
or AC adapters during a thunderstorm.
-
Never connect or disconnect cables
or AC adapters with wet hand
s.
UberLux is not liable for any injuries arising or
resulting from improper securing of cables.
•
To prevent the risk of tripping or falling:
-
Place connection cables in a well-marked
or well-secured/concealed location.
-
Be mindful of loose or missing
anti-skid pads, when detached they pose
a slip threat.
-
Avoid walking upon your Helios if its
surface is wet as it poses a slip threat.
Remove all fluids from top lens prior to
stepping on the panel.
- UberLux is not responsible or liable for
injuries, personal or otherwise, that arise due
to Helios being used in unintended manners.
Getting to know your Helios
Before using your Helios for the first
time, familiarize yourself with the
light panel and its control box.
Detailed view of light panel:
1. Powder coated aluminum frame
2. Impact-resistant polycarbonate lens
3. Two LED strips inside (not shown)
4. Anti-skid pads (6x) (rear side)
5. Lift-aiding notch
6. Cable port
5
1
3
2
4
6
Port detail
Intended use
The Helios light panel serves to illuminate
working areas such as workshops, vehicle service
bays, showrooms, or production plants. When placed
on a level surface, Helios can be walked upon and
driven upon by vehicles.
NOTE:
UberLux is not deemed liable for damage
caused by any use of Helios that does not comply
with its intended use. Observe all instructions
regarding handling and safety provided in this
user manual.
SAVE THESE INSTRUCTIONS
