Hekatron FSZ Pro, Инструкция по эксплуатации

Страница: 7 / 48

7
4 Product description
4 Product description
The hold-open control unit, FSZ Pro, is preferably used to supply hold-open systems with voltage.
Compared to the FSZ Basis, the FSZ Pro offers some additional features.
- Switching
power supply with higher performance (output current max. 900 mA)
- Optional energy storage with energy storage module ESM Pro
(must be ordered separately)
- Built-in horn (signals up to 60 seconds after power failure)
- Alarm input for networking with alarm control panel
- Silent closure
- Horn can be switched on or off optionally
- Additional relay with a potential-free alternating contact for free use
Common features FSZ Pro and FSZ Basis
- Integrated
manual release button conforming to standard and reset button
- Tested according to DIN EN 14637
- Distinction between fault causes via the LED flash code on the keypad
- Alarm storage can be activated via DIP switch
- Line surveillance can be activated via DIP switch
- Two smoke switch stubs can be connected with activated line surveillance
- Relay with potential-free alternating contact at the user‘s free disposal
- Short-circuit-proof primary pulsed switching power supply unit with stabilised output voltage
- Power supply with overtemperature shutdown