Hekatron FSZ Pro, Инструкция по эксплуатации

Страница: 5 / 48

5
1 General safety information and protective measures
1 General safety information and protective measures
The present documentation describes the function of the FSZ Pro with the hardware and software
version applicable at the date of issue of this document.
Information for Germany
The currently valid test regulations of the Deutsches Institut für Bautechnik and the respective type
approval must be observed and followed while projecting, assembling, installing and operating
hold-open systems on fire barriers.
The information contained in this Instruction Manual is based on these regulations.
Ensure proper use!
– The technical data specified for the equipment must be observed.
– Modifications or changes to the equipment are not permitted.
– The equipment must be used only for its intended purpose in an undamaged and perfect
condition.
– No other spare parts than those available from the manufacturer must be used.
– The allowed components of the hold-open system are listed in a separate type approval.
Hold-open systems are subject to the duty of servicing required according to DIN 31051 and DIN
14677. More information can be found in the respective type approval document of the hold-open
system.
If the use of the system is changed, it must be verified whether the legal provisions, requirements
and state of the art are appropriately taken into account.
Specialised staff must be provided for projecting, assembling and commissioning.
When working on electrotechnical installations, special regulations must be complied with.
Such work may only be carried out by authorised qualified electricians.