9
GASOLINE GENERATOR
6. Attach the plug washer and thread the plug in by hand to prevent cross threading.
7. After a new spark plug has been seated by hand, it should be tightened 1/2 turn
with a wrench to compress its washer. If a used plug is being reinstalled, it should
only require 1/8 to 1/4 turn after being seated.
CAUTION:
•
The spark plug must be securely tightened. An improperly tightened plug can
become very hot and possibly damage the generator.
•
Never use a spark plug with an improper heat range.
(4) Fuel filter service
The filter prevents dirt or water which may be in fuel tank from entering the
carburetor. If the engine has not been run for a long time, the filter should be
cleaned.
1. Turn the fuel valve OFF. Remove the filter cup.
2. Clean the cup thoroughly.
3. Reassemble. Do not damage the rubber gasket.
WARNING! After installing the filter cup, check for leaks and make sure the area is
dry before starting the engine.
OFF
LOOSEN
RUBBER GASKET
FILTER CUP
