Translation of the original instructions / Small animal clipper
11
6.2
Activities during operation
6.2.1 Clipping
1.
Fix and calm the animal sufficiently before clipping.
2.
Switch on the clipper already in the field of vision of the animal.
3. Approach to the animal from ahead.
4. During clipping, look at the behaviour of the animal.
6.2.2 Changing the clipper head
1. Move the switch to position "0"
(Fig. 4).
2. Push the interlock clipperhead.
Fig. 11
3. Fold the clipper head forwards
when the interlock clipper head
is pressed.
4. Take off the clipper head.
5. Clean the opened hinge by the
help of the provided brush.
Fig. 12
6. Fit the favoured clipperhead to the blade hinge and fold it on to the
switched-on clipper by light pressure. (fig. 8, 9, 10).
NOTE!
Only work with sharp clipping blades, replace blunt or defective blades with-
out teeth. The correct resharpening of clipping blades is only to be done
by special machines or by a specialist. In that case, contact your service
centre.