Heiniger ONE/G, Перевод оригинальной инструкции

Страница: 20 / 152

2.4 Equipment
y
Portable shearing plant
y
Operating instructions
y
Screwdriver
y
Drip feed lubricator 100 ml
y
Universal grease
Options
y
Flexible drive, worm
y
Flexible drive, pin
y
Ferrule short
y
Shearing handpiece, Icon, worm
y
Shearing handpiece, Icon, pin
y
Combs and cutters for the shearing handpiece
3 Initial start-up
3.1 Important notes
WARNING!
y
The voltage specified on the maker’s plate and that of the local
power supply must match. The plant may only be connected to
an AC power supply.
y
It is a compulsory that the operator has read the safety regu-
lations.
y
In the event that the plant is operated from a generator, the
mains supply voltage must not exceed that specified on the
maker‘s rating plate.
3.2 Assembling the shearing plant
Pay attention to sufficient fastening of the shearing plant.
3.2.1 Securing / suspending the shearing plant
The shearing plant can be suspended by means of a strong rope or
chain. The hole provided in the handle should be used to secure the plant
(Diag. 2, pos. c).
ONE Shearing Plant – Translation of the original instructions
8