Heiniger 709-000 CH, Перевод оригинальной инструкции, Страница: 35 / 244

Translation of the original instructions / Small animal clipper
15
6.2.2 Changing the battery
When the battery is unloaded, the clipper is turned off by a protective circuit.
1 2
1. Move the switch to position "0" (fig.4).
2. Push the battery interlock (2) on both
sides inward and pull the battery (1)
out of the clipper.
Fig. 20
1 2
3. Insert charged battery (1) into the
shearer (2), until the battery lock is
locked in on both sides.
Fig. 21
6.2.3 Changing the clipperhead
1. Move the switch to position "0" (fig.4).
2. Push the interlock clipperhead.
Fig. 22
3. Fold the clipperhead ahead when
the interlock clipperhead is pressed.
4. Take off the clipperhead.
5. Clean the opened hinge by the help
of the provided brush.
Fig. 23
6. Fit the favoured clipperhead to the blade hinge and fold it on to the swit-
ched-on clipper by light pressure. (fig. 17, 18, 19).
NOTE!
Only work with sharp blades, replace blunt or defective blades without teeth.
The correct resharpening of blades is only to do by special machines or by a
specialist. In that case, contact your service centre.