9
Safety Instructions
Safety during use
➜
Beware of the effect of magnetic fields on cardiac pacemakers or magetic sensitive
data media. Observe the according warning in chapter “Start-up”, “Setting up device”.
➜
Wear the appropriate protective clothing when working on the device (protective
glasses and, if necessary, safety gloves).
➜
Do not use the device in potentially explosive areas. The device is not protected
against explosion. There is no explosion or ATEX protection available.
➜
Do not carry out work with naked flames in the vicinity of the device (risk of
explosion).
➜
Do not operate or assemble devices in the vicinity which are emission or radiation
sources (electromagnetic waves) for the frequency range (3*10
11
Hz to 3*10
15
Hz).
➜
Do not operate or assemble appliances in the vicinity of the device which constitute
emission or radiation sources for ionizing radiation or in the ultrasonic range.
➜
Do not operate the device where adiabatic compression or shock waves might occur
(shock wave combustion).
➜
Do not use substances, where the energy input due to mixing might pose a hazard.
➜
Do not spill liquids over the device or any parts of it.
➜
Remove any accidentally spilled liquids immediatly.
➜
Eliminate errors immediately.
➜
Always switch the device OFF after use.
➜
Do not use abrasive material to clean the surface. Only wipe with damp cloth.
Disposal
➜
Check the device components for hazardous substances and
solvents.
➜
Clean all components before disposal.
➜
Dispose of the device in accordance with the relevant
national regulations.
➜
Dispose of the packaging material in accordance with the
appropriate national regulations.
