Heidolph Hei-CHILL 3000, Руководство по эксплуатации

Страница: 25 / 120

Operation
25
Activating / deactivating the autostart
✓ The device is switched on.
➜ Select the submenu “Setup” / “Basic
settings” / “Autostart”.
➜ Use the arrow buttons to select “on”
and confirm your selection using the
button “Select” .
✓ Autostart is activated.
➜ To switch to standby mode, select the
"off" option from the "Autostart" menu.
Setting the operating mode for the cooling unit
The cooling unit can be controlled both automatically and manually.
The setting is “automatic” when the device is delivered.
▪ “off” deactivates the cooling unit until it is activated again
▪ “on” activates the cooling unit permanently until another option is selected
▪ “automatic” switches the cooling unit automatically on or off when needed.
✓ The device is switched on.
➜ Select the submenu “Setup” /
“Cooling”.
➜ Use the arrow buttons to select one
of the presented options and confirm
your selection using the button
“Select” .
✓ The changed operating mode is
activated.
The flow line temperature for automatic control of the cooling unit is
±2 K from the setpoint. Under certain ambient conditions, this may
lead to longer downtimes of the cooling unit. This does not impair the
cooling output.