HEIDENHAIN TNC 640, Руководство пользователя, Страница: 71 / 948

First Steps with the TNC 640 | Programming the first part
1
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
71
Opening a new program/file management
Press the
PGM MGT
key
The control opens the file manager.
The file management of the control is arranged
much like the file management on a PC with
Windows Explorer. The file management enables
you to manage data in the control's internal
memory.
Use the arrow keys to select the folder in which
you want to open the new file
Enter any desired file name with the extension
.H
Press the
ENT
key
The control asks you for the unit of measure for
the new program.
Select the unit of measure: Press the
MM
or
INCH
soft key
The control automatically generates the first and last blocks of the
program. Afterwards you can no longer change these blocks.
Further information on this topic
File management
Further information: "Working with the file manager",
page 178
Creating a new program
Further information: "Creating and writing programs",
page 161