HEIDENHAIN TNC 640, Руководство пользователя, Страница: 546 / 948

Special Functions | Adaptive Feed Control AFC (option 45)
12
546
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
Activating and deactivating AFC
NOTICE
Caution: Danger to the tool and workpiece!
As soon as you deactivate the
AFC
function, the control
immediately switches to the programmed machining feed rate.
If the
AFC
function decreased the feed rate (e.g. due to wear)
before it was deactivated, the control accelerates the feed rate
up to the programmed value. This applies regardless of the
method used for deactivating the function (soft key, feed rate
potentiometer, etc.). This acceleration may result in damages to
the tool or the workpiece!
If it is imminent that the feed rate falls below the
FMIN
value,
stop the machining operation (instead of deactivating the
AFC
function)
Define the overload reaction for cases in which the feed rate
falls below the
FMIN
value
Operating mode: Press the
Program run, full
sequence
soft key
Shift the soft-key row
To activate the adaptive feed control: Set the soft
key to
ON
—the control displays the AFC symbol
in the position display
Further information: "Status displays", page 98
To deactivate the adaptive feed control: Set the
soft key to
OFF