HEIDENHAIN TNC 620, Руководство пользователя

Страница: 259 / 521

Testing and running | Measuring
6.5 Measuring
Application
In
Test Run
operating mode, you can use the
MEASURING
soft key to
display the following information:
Approximate coordinates as XYZ values
Optional display
FMAX: If the control machines at the maximum feed rate.
Tool number
Tool name
Proceed as follows to select the measuring function:
Set the
MEASURING
soft key to
ON
Position the mouse pointer on the respective
position
The control displays the positioning ball icon and
the surface orientation with a black and white
circle and a perpendicular line on it.
The corresponding information is displayed in a
blue text field.
The
MEASURING
soft key is available in the following
views:
Plan view
3-D view
Further information: "View", Page 251
6
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
259