HEIDENHAIN TNC 620 E, Руководство пользователя

Страница: 773 / 840

MOD Functions | Load machine configuration
19
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
773
19.16 Load machine configuration
Application
NOTICE
Caution: Data may be lost!
The
RESTORE
function irrevocably overwrites the current
machine configuration with the backup files. The control does
not perform an automatic backup before the
RESTORE
function.
The files are thus permanently gone.
Perform a backup of the current machine configuration prior
to the
RESTORE
function
Use the function only in consultation with the machine tool
builder
Your machine tool builder can provide you a backup with a machine
configuration. After entering the keyword
RESTORE
, you can load
the backup on your machine or programming station. Proceed as
follows to load the backup:
Enter the keyword
RESTORE
in the MOD dialog
Select the backup file in the control’s file manager
(e.g., BKUP-2013-12-12_.zip)
The control opens the pop-up window for the backup.
Press Emergency Stop
Press the
OK
soft key to start the backup process