HEIDENHAIN TNC 620 E, Руководство пользователя

Страница: 745 / 840

MOD Functions | Machine settings
19
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
745
Tool usage file
Refer to your machine manual.
The tool usage test function must be enabled by your
machine tool builder.
With the MOD function
Tool-usage file
, you can select whether
the control never, once, or always creates a tool usage file.
Generate a tool usage file:
In the MOD menu, select the
Machine settings
group
Select the
Tool-usage file
menu
Select the desired setting for the
Program Run, Full Sequence/
Single Block
and
Test Run
operating modes
Press the
APPLY
soft key
Press the
OK
soft key
Select kinematics
Refer to your machine manual.
Your machine tool builder configures and enables
the
Kinematics selection
function.
NOTICE
Danger of collision!
All stored kinematics can also be selected as active machine
kinematics. By this means, all manual movements and
machining operations are executed using the selected
kinematics. All subsequent axis movements pose a risk of
collision!
Use the
Kinematics selection
function only in the
Test Run
operating mode
Use the
Kinematics selection
function for selecting the
active machine kinematics only as needed
You can use this function to test programs whose kinematics
does not match the active machine kinematics. If your machine
manufacturer saved different kinematic configurations in your
machine, you can activate one of these kinematics configurations
with the MOD function. When you select a kinematics model for
the test run this does not affect machine kinematics.
Ensure that you have selected the correct kinematics
in the Test Run operating mode for checking your
workpiece.