Programming: Programming contours
6.4
Path contours - Cartesian coordinates
6
202
TNC 320 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
CircleCR with defined radius
The tool moves on a circular path with the radius R.
Coordinates
of the arc end point
Radius R
(the algebraic sign determines the size of
the arc)
Direction of rotation DR
Note: The algebraic sign
determines whether the arc is concave or convex.
Miscellaneous function M
Feed rate F
Full circle
For a full circle, program two blocks in succession:
The end point of the first semicircle is the starting point of the
second. The end point of the second semicircle is the starting point
of the first.
Central angle CCA and arc radius R
The starting and end points on the contour can be connected with
four arcs of the same radius:
Smaller arc: CCA<180°
Enter the radius with a positive sign R>0
Larger arc: CCA>180°
Enter the radius with a negative sign R<0
The direction of rotation determines whether the arc is curving
outward (convex) or curving inward (concave):
Convex: Direction of rotation
DR–
(with radius compensation
RL
)
Concave: Direction of rotation
DR+
(with radius compensation
RL
)
The distance from the starting and end points of the
arc diameter cannot be greater than the diameter of
the arc.
The maximum radius is 99.9999 m.
You can also enter rotary axes A, B and C.
Содержание TNC 320
