HEIDENHAIN GAGE-CHEK 2000 Series, Руководство по эксплуатации

Страница: 166 / 236

Measuring | Conducting a measurement
9
9.2.9 Performing a relative measurement
Precondition: The
Relative
function is configured
Further information: "Configuring the Relative function", Page 134
2
3
1
Figure 33:
Measure
menu with activated
Relative
function
1
Position value referenced to the selected preset
2
Position value of the relative measurement, independent of the selected preset
3
Function element with active
Relative
function
The
Relative
function lets you perform relative measurements independently
of the selected preset. When the Relative function is active, the preset table
is barred from editing, so that the zeroing of axes or the overwriting of position
values has no effect on the selected preset.
Tap Measure in the main menu
In order to perform a relative measurement, tap the
Relative
function element
The green lettering of the function element indicates that the
Relative function is active
The position display switches over to the position values of
the relative measurement
The preset table is barred from editing
Zero the axis as needed
or
Overwrite the position values as needed
Perform the desired measurement
In order to end the relative measurement, tap the
Relative
function element again
The position display switches over to the standard view
The preset table is enabled for editing
166
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020