HEIDENHAIN 548431-05, Руководство пользователя, Страница: 668 / 722

Organization mode of operation | Transfer submode
9
668
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Creating a data backup file
Creating a data backup file involves the following steps:
Copying the program files to the transfer folder
NC main programs
NC subprograms (with graphics)
Cycle programs
ICP contours
Creating a parameter backup and copying all backup files from
the
para
and
table
folders to the project folder. (PA_Backup.zip,
TA_Backup.zip)
Creating a tool backup file and copying all tool backup files from
the tool folder to the project folder (TO_Backup.zip)
Service files are not created and copied
Selecting a data backup file
You can also create a data backup file without connecting to an
external storage device.
Creating a data backup file:
Select the
Organization
operating mode
Press the Transfer soft key (login required)
Press the
Data Backup
soft key
Soft keys for transferring data backup files
Soft key Meaning
Start backing up the data to a complete
transfer folder
Existing files will be overwritten without a
confirmation prompt
To cancel the data backup, press the
Cancel soft key.
The backup process stops as soon as the currently
running partial backup is completed