HEIDENHAIN 548431-05, Руководство пользователя, Страница: 65 / 722

Basics of operation | Operation and data input
2
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
65
Data input
Input windows comprise several
input fields
. You can move the
cursor to the desired input field with the
up
or
down
arrow key. The
control shows the function of the selected field in the bottom line
of the window or directly before the input field.
Place the highlight on the desired input field and enter the data.
Existing data are overwritten. With the
left or right arrow key,
you can move the cursor
within
the input field and place it on the
position where you want to delete, copy or add characters.
To confirm the data you entered in a field, press the
up
or
down
arrow key or the ENT key.
If there are more input fields than a window can show, a second
input window is used. You will recognize this through the symbol
in the bottom line of the input window. To switch back and forth
between the windows, press the PgUp/PgDn keys.
Data entry is concluded when you press the OK ,
Input finished
or
Save
soft key. The
Back
or
Cancel
soft
key discards input or changes.
smart.Turn dialogs
The unit dialog is divided into fillable forms and the forms are
divided again into groups. The forms are identified by tabs and fine
lines divide each tab into groups. You can navigate between the
forms and groups with the smart.Turn keys.
smart.Turn keys
Go to the next form
Go to next or previous group