HEIDENHAIN 548431-05, Руководство пользователя, Страница: 598 / 722

Tool and technology database | Technology database
8
598
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Technology editor submode
Technology editor
submode can be called from the
Tool editor
and smart.Turn modes of operation.
Database access to the following combinations is supported:
Workpiece-material/machining-mode combinations (blue)
Cutting-material/machining-mode combinations (red)
Workpiece-material/cutting-material combinations (green)
Editing workpiece-material and cutting-material designations :
The Technology editor submode keeps one list each with
workpiece-material designations and cutting-material designations.
You have the following options:
Insert new workpiece/cutting materials
Do not change
the workpiece/cutting material designations
Delete
existing workpiece/cutting material designations. This
also deletes the associated cutting data
Explanation of abbreviations used in the figure:
Task : Machining mode
WS
:
Material
SS : Cutting material
Deleting workpiece-material designations or cutting-
material designations also deletes the associated cutting
data.
Following that, the control cannot determine any
cutting data for the affected programs or tools.
Editing the cutting data : The cutting data of a workpiece-material/
cutting-material combination are called a data record .
You have the following options:
Assign cutting data to a workpiece-material/cutting-material
combination to create a new data record
Delete the cutting data of a workpiece-material/cutting-material
combination (a data record)
Calling the Technology editor submode in Tool editor mode of
operation:
Press the Other tables soft key
Press the Technology editor soft key