HEIDENHAIN 548431-05, Руководство пользователя, Страница: 362 / 722

Teach-in | Milling cycles
5
362
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Rapid positioning, milling
Select
Milling
Select Rapid positioning
The cycle activates the C axis and positions the spindle (C axis) and
the tool.
Rapid traverse positioning is only possible in
Machine mode
The C axis is deactivated by a subsequent manual
milling cycle
Cycle parameters:
X2 , Z2 : Target point
C2
:
End angle
—C-axis position (default: current spindle angle)
MT : M after T : M function that is executed after the tool call T
MFS : M at beginning : M function that is executed at the
beginning of the machining step
MFE
:
M at end
:
M
function that is executed at the end of the
machining step
WP : No. of spindle – Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
Cycle run:
1 Activate the C axis
2 Insert the current tool
3 Position the tool at rapid traverse to the
Target point X2 , Z2 and
the End angle C2