manualshive.com logo in svg

HEIDELBERG PG.010.000B, Руководство пользователя, Страница: 36 / 116

Поделиться
Скачать
HEIDELBERG PG.010.000B Скачать руководство пользователя страница 36

Operation

36

Version 2019

Operation:

1.

Click the "Device" button in the Suprasetter GUI.

2.

Click "Configuration" in the vertical menu bar.

3.

Select the "Timer" tab.

4.

Select "Switch on Timer".

5.

Set the startup cycle you want in "Schedule" in the "Settings" box.

6.

Set the switch-on time you want in "Start Time" in the "Settings" box.

Note: If you selected "Once" in "Schedule", you can also set the startup 
day in addition to the start time in "Schedule Once".

7.

Click "Apply". The startup time is saved and the Suprasetter will switch 
itself on at this time.

Switching off the Suprasetter

There are two ways to switch off the Suprasetter:

• Shutdown using the user interface on the workstation.

• Shutdown with the On/Off button on the device.

Notice

To prevent condensation damaging the Suprasetter, the 
required ambient conditions (see the Technical Data chap-
ter) must be complied with for at least 12 hours after the 
machine is switched off.

i

i

Содержание PG.010.000B





















































































































Отзывы:

Нет отзывов