Gas fired igniter ZA0 / ZDA0
Dismantling / Disposal
Status: 11-2018
- 55 -
DANGER!
Risk of explosion due to leaking gas!
Accidental gas leaks can cause an explosion or
serious burns!
When dismantling, shut off the gas valve!
– Ensure that no residual gas remains, if
necessary inert the gas lines.
– If gas is unintentionally released into the
atmosphere, immediately shut off the gas flow.
Prevent gas entering drainage systems,
basements, work pits or other locations in which
collected gas could cause a hazard.
1.
Switch off the gas fired igniter and secure it against being
switched back on.
2.
Completely disconnect the gas fired igniter from the energy
supply and gas / air supply.
3.
Remove operating and auxiliary materials as well as residual
processing materials and ensure their ecologically responsible
disposal.
The gas fired igniter can now be cleaned for separation and
dismantled in compliance with applicable occupational safety and
environmental protection legislation.
10.3 Disposal
Provided no return acceptance or disposal agreement has been
concluded, the components once dismantled can be sent for
recycling:
Send metals for recycling.
Send plastic elements for recycling.
Dispose of the remaining components separated according to
material properties.
NOTE!
Environmental damage due to incorrect
disposal!
Electric scrap, electronic components, lubricants
and other auxiliary materials are subject to special
waste treatment and may only be disposed of by
authorized specialist companies!
The local authorities or specialist disposal companies can provide
information on environmentally responsible disposal.
