background image

Users Manual

Thank you for choosing our products!

With the development of the OBELISK separates, our aim was to take our highly praised
and award-winning Obelisk Si integrated amplifier to the next level of performance, in terms
of both functionality and sound. Using separate components for the various amplifier stages
gives more flexibility of use and achieves more transparency, information retrieval and
dynamic capability. We sincerely hope that you will agree, and that your Obelisk separates
will provide you with many years of impeccable, trouble-free operation.

Happy listening!

These components are designed to offer the finest performance available by avoiding
compromise, wherever possible. This detailed guide contains advice specifically related
to using this amplifier combination, as well as more general warnings about the use of
domestic audio components.

OBELISK
separates

PRE and PX

SPECIFICATIONS

Input (1) impedance:

75 Ohm

Input (2-6) impedance:

10 kOhm

Input (2-6) sensitivity (at 775 mV

RMS

out):

220 mV

RMS

Input (2) sensitivity / impedance with MM phono module 

5 mV / 47 kOhm

Output impedance (Pre Out, Tape Out):

35 Ohm

Maximum output level (at THD = 1%):

7.5 V

RMS

Gain:

10 dB

Headroom:

20 dB

Signal-to-noise ratio (A-weighted):

98 dB

Total harmonic distortion (at 775 mV

RMS

out), unweighted):

<0,005 %

Frequency response (+0, -1 dB, unity gain):

1 Hz - 105 kHz

Frequency response (+0, -3dB, unity gain):

1 Hz - 220 kHz

Power consumption:

<10 W

Power consumption (standby):

4 W  (+1 W per module)

Weight (Obelisk PRE): 

4.2 kg

(Obelisk PX): 

5 kg

If within three years of the purchase date your Heed OBELISK PRE or PX prove to be defective
for any reason other than accident, misuse, neglect, unauthorised modification or fair wear and
tear, Heed Audio Ltd. will, at its discretion, replace the faulty parts without charge for labour. This
factory warranty is valid only for units sold into countries with no appointed Heed distributor.
Service enquiries in countries with appointed distributor should be addressed first to the
supplying dealer and/or Heed distributor. Warranties granted in these countries are entirely
at the discretion of distributor.

FACTORY CONTACT

DISTRIBUTOR CONTACT

WARRANTY

HEED Audio Kft. (Ltd)

Tel/Fax: +36 1 2947401

Reviczky Gyula u. 9-11

eMail: [email protected]

H-1181 Budapest 
Hungary

Web: www.heedaudio.com

Heed OBELISK PRE - Users Manual 1.1 (2010)

Отзывы: