HEBU HBS x-touch 200i, Руководство по эксплуатации, Страница: 49 / 167

HBS x-touch 200i
49
EN
7.11 Operating errors
In the case of an operating error, the following display appears:
The following error messages can occur:
If one or more numerical codes are displayed, or if the device is indicating any other recognizable
defects, please refer to service@hebumedical.de

HF current does not flow when the foot switch is actuated. The system only reacts with a
tone signal and the display changes colour.
Please check:

That all terminals have been correctly connected

The settings of the foot switch

Whether the neutral electrode has been recognized

The neutral electrode is not detected or not correctly
Check all terminals. If the neutral electrode is still not recognized, exchange it where appropriate.

It is not possible to switch the machine on or off.
Check whether the power cable has been correctly connected and that the socket is intact. If the
error persists, inform the specialist personnel.

The system works perfectly, but the settings cannot be saved.
Inform the specialist personnel.
Error - display Cause of error Remedying errors
NE Error - No 1
Neutral electrode not connected,
not known, or NE is defective
Check the terminal, touch the NE symbol
on the touchscreen for detection, where
applicable exchange NE and/or
connecting cable.
Mono1 - Cut hand/
FS1 Error Terminals: cut foot switch or
button on handle
Check the terminals, check the settings,
exchange accessories if necessary. If
error persists, inform specialist personnel.
Mono1 - Coag
hand/ FS1 Error Terminals: coag foot switch or
button on handle