Welcome to the programming guide for
your new Heatrite HT1 thermostat
1.
To Switch your thermostat on simply tap the power switch icon on your glass screen.
2.
This will take you to the main home screen.
3.
To begin programming the thermostat we first have to set the clock and the day of the
week.
4.
To set the clock to the correct time gently tap on the tick icon at the bottom of the display.
Use the up and down arrows to adjust the time, once you have chosen the correct time tap
the tick icon.
5.
You will now see the day of the week flashing, using the up and down arrows select the
correct day of the week, then tap the tick icon to confirm.
6.
You have now set the time and day of the week and have returned to the home screen.
7.
There are two options to choose from when programming your thermostat. Manual mode
or Auto Mode.
8.
To run the thermostat in manual mode allows you to switch the heating on and off
manually and adjust the temperature manually.
9.
To operate the thermostat manually and not program it around your daily lifestyle tap the
M button on the display. There will be a “click” sound and a handprint icon will appear with
a heat icon, this indicates the thermostat is currently heating.
10.
By using the up and down arrows on the display you can increase and decrease the floor
temperature. When you have selected your temperature preference, tap the tick icon, your
floor is now heating to the desired set temperature.
11.
We recommend to get the best out of your heating and to run it efficiently around your
daily lifestyle that you programme the thermostat to Auto Mode.
12.
To run the thermostat in Auto mode, tap the M icon until the clock is displayed then press
and hold the M icon for 5 seconds. The thermostat is now in programming mode.
13.
Displayed at the top of the screen are the numbers 1-5, these represent the days of the
week.
14.
The time currently being displayed shows 0625am with P1 displayed next to it. This
indicates the time the thermostat will activate the heating in the morning. You may wish to
change the time by using the up and down arrows, we recommend you set the timer to 30-
60 minutes before you want to use the room. Once you have selected your chosen time
tap the M icon to confirm.
www.heatritenz.com
