HeatLink HEP025RT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 8 / 20

®
Heat Link
www.heatlink.com
8
HEP025RT
Installation, Operation, and Maintenance Manual
L6HEP025RT
HEP025R
Listing cETLus
Conforms to CAN/CSA-C22 No.14, UL508
Dimensions 24”H × 18¾”W × 7¾”D
Weight 30 lbs
Nominal panel output
*see conditions below
25,000 Btu/hr
Max ambient temperature 120°F
Max water temperature 200°F
Settable fluid temp range dependant on heat source temperature
1/2" Safety relief valve
Calibrated adjustment allows for setting valve to required pressure relief.
Adjustable range 50-175psi (3.45-12.06 bar). The Series 530C and LF530C
is ideal for bypass thermal expansion pressure relief.
Power supply: pre-wired on system controller 120 V ac; max. current 2A
Primary pump Non-ferrous, Grundfos UPS15-58CIL2
Secondary pump Non-ferrous, Grundfos UPS15-58CIL2
Heat exchanger Single-wall brazed plate; 3×8-12
Auxiliary terminal Yes, dry contacts, max. load 10A
DHW priority Optional @ ~0.5 US gpm DHW flow
Temperature control method None
Piping ¾" 304 Stainless steel tubing
Piping connections 1" FNPT, ¾" FNPT
DHW priority switch connection ½" FNPT (FLWSWTCH optional)
Backplate Galvanized steel
Enclosure Powder coated steel
Specifications & Listings