Heatilator CNXT70IH Скачать руководство пользователя | Manualshive

Страница: 1 / 55

background image

Heatilator • CNXT Series • 4000-011 Rev N • 11/05

1

Owner’s Manual

Installation and Operation

Models:
CNXT70IT CNXT70IH
CNXT70ILT CNXT70ILH
CNXT90IT CNXT90IH
CNXT90ILT CNXT90ILH
Direct Vent Gas Appliance

DO NOT DISCARD THIS MANUAL

CAUTION

• Important

operating

a n d m a i n t e n a n c e
instructions included.

•

Leave this manual with
party responsible for
use and operation.

•

Read, understand
a n d f o l l o w t h e s e
instructions for safe
i n s t a l l a t i o n a n d
operation.

DO

NOT

DISCARD

Installation and service of this appliance should
be performed by qualiﬁ ed personnel. Hearth &
Home Technologies suggests NFI certiﬁ ed or
factory-trained professionals, or
technicians supervised by an NFI
certiﬁ ed professional.

If the information in these instruc-
tions is not followed exactly, a
ﬁ re may result causing property
damage, personal injury, or death.

• Do not store or use gasoline or other ﬂ am-

mable vapors and liquids in the vicinity of
this or any other appliance.

• What to do if you smell gas:

- Do not try to light any appliance.
- Do not touch any electrical switch. Do not

use any phone in your building.

- Immediately call your gas supplier from

a neighbor’s phone. Follow the gas
supplier’s instructions.

- If you cannot reach your gas supplier, call

the ﬁ re department.

• Installation and service must be performed

by a qualiﬁ ed installer, service agency, or
the gas supplier.

WARNING

HOT! DO NOT TOUCH

.

SEVERE BURNS MAY RESULT.
CLOTHING IGNITION MAY RESULT.

WARNING

• Keep children away.
• CAREFULLY SUPERVISE children in same room as

appliance.

• Alert children and adults to hazards of high

temperatures.

• Do NOT operate with protective barriers removed or

door open.

• Keep clothing, furniture, draperies and other

combustibles away.

Glass and other surfaces are hot during
operation and cool down.

This appliance has been supplied with an integral barrier to
prevent direct contact with the ﬁ xed glass panel. Do NOT
operate the appliance with the barrier removed.

Contact your dealer or Hearth & Home Technologies if the bar-
rier is not present or help is needed to properly install one.

This appliance may be installed as an OEM installation
in manufactured home (USA only) or mobile home and
must be installed in accordance with the manufacturer’s
instructions and the manufactured home construction and
safety standard,

Title 24 CFR, Part 3280

or

Standard for

Manufactured Home Installations, ANSI A225.1.

This appliance is only for use with the type(s) of gas indicated
on the rating plate.

1
2
3
...
»

Содержание CNXT70IH
























































Отзывы:

Нет отзывов

Похожие инструкции для CNXT70IH

Бренд: e-Flame USA Страницы: 9

Бренд: Glow Fire Страницы: 101

Бренд: HAMPTON BAY Страницы: 36

Бренд: Be Modern Страницы: 8

Бренд: Camina Страницы: 48

Бренд: Heatilator Страницы: 32

Бренд: Napoleon Страницы: 148

Бренд: Lennox Страницы: 32

Бренд: Magiglo Страницы: 56

Бренд: Dimplex Страницы: 20

Бренд: Vermont Castings Страницы: 40

Бренд: RAIS Страницы: 11

DVLINEAR36 Series

Бренд: Hearth & Home Страницы: 2

Contura C610 Style

Бренд: Nibe Страницы: 20

Winchester WIN28E

Бренд: Dimplex Страницы: 4

Бренд: Dimplex Страницы: 77

18.0 NEW FOREST 1200

Бренд: British Fires Страницы: 49

Бренд: Majestic Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды