Heater Sports Slider Lite-Ball Скачать руководство пользователя страница 1

Read This Before Operating

IMPORTANT

DO NOT RETURN THE SLIDER MACHINE TO THE RETAIL STORE WHERE PURCHASED.

CALL TOLL FREE: (800) 492-9334.

WARNING:  ONLY USE SLIDER LITE-BALLS IN THE Slider MACHINE

The Slider Lite-Ball Pitching Machine only uses Slider Lite-Balls.  If you put real baseballs the Slider Lite-Ball 

Machine you will damage the machine and void the Slider warranty.  Heater Sports recommends only using 

official Slider Lite-Balls in your Slider Lite-Ball Pitching Machine.  These balls are incredibly accurate, long last-

ing, and produce the best performance in the machine.

CUSTOMER SERVICE

HEATER SPORTS 

is dedicated to your customer satisfaction.  If you experience any trouble with the operation 

of the Slider Pitching Machine contact us at: (800) 492-9334 or log on to www.HeaterSports.com.

WARNING: 

THIS PRODUCT IS TO BE USED BY ADULTS ONLY.   MAKE SURE MACHINE IS TURNED OFF BEFORE 

ASSEMBLY!  KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL ENTRY AND EXIT!  SERIOUS HAND, EYE, AND 

BODILY INJURY MAY OCCUR IF USED INCORRECTLY!

•  Please be sure to read all of the instructions before using the Slider Lite-Ball 

 

Pitching Machine to insure the machine is working properly.

•  Parents: Your child should be made aware of the potential dangers of using the

 

Slider Lite-Ball Pitching Machine.

•  Never put your fingers into the Slider Lite-Ball Pitching Machine.

•  The Slider is not a toy and an adult should supervise children.  It is very important

 

the batter makes sure the area is clear before swinging a bat.

•  Stay clear of the ball opening while the Slider is operating.  Although the balls are

 

very light, they may cause eye damage or other injury may occur.

 

Children must be advised of this danger and appropriate precautions should be taken.

• 

DO NOT 

use any type of ball other than Slider Lite-Balls in this machine. 

•  Always use a NOCSE approved batting helmet when batting.
• 

DO NOT LOOK INTO THE FRONT OF THE MACHINE WHILE THE SLIDER IS RUNNING

.

 

Occasionally a ball may get stuck in the machine.  The ball may pause and then shoot out and cause 

 

eye injury.  If the ball gets stuck, turn off the machine immediately.  You should be able to remove the 

 

ball easily by tilting the Slider backwards to eject the ball.

•  Never operate in water or moisture.

•  Always store in a dry area.

Содержание Slider Lite-Ball






Отзывы: