heatapp! T2B, Инструкция по эксплуатации, Страница: 82 / 135

Functions of the room- and radio components
S. 82
11.5 heatapp! floor
Fig.: 61: heatapp! floor
heatapp! floor is a controller for thermal actuators in underfloor heating installations and is part of the heatapp! system,
providing individual circuit control for underfloor heatings.
Up to eight channels each with up to three thermal actuators can be controlled. A maximum of 24 thermal actuators can be
connected.
heatapp! floor communicates wirelessly with the heatapp! gateway . Wireless transmission takes place via the Z-wave protocol.
Like all 230V Z-wave components, the heatapp! floor also functions as a repeater. Therefore it improves the wireless coverage of
the heatapp! system. Telegrams from radio components, which without a repeater would not reach the gateway, are forwarded
by the repeater function of the heatapp! floor.
Note
The aerial of the heatapp! floor should be led out of the control cabinet, so that good communication with the heatapp!
gateway can be established.
The heatapp! floor is connected to existing thermo-electric actuators (230 V, closed without power).
To check the channels, a relay test is performed in the Expert menu of the heatapp! base . For more information, see “Hardware”
chapter on page 114.