heatapp! T2B, Инструкция по эксплуатации, Страница: 50 / 135

Control
S. 50
10.2.2.6 Editing scenes
Fig.: 28 „Scenes" area
In the " Scenes " area, the rooms for which the scenes are to apply, are assigned to the scenes.
1. Tap a scene to open a room assignment.
2. Tap on the rooms that are to be assigned to the scene under consideration. Horizontal swiping changes between the
room groups. Selected rooms are highlighted in orange.
3. Tap on " Save " to accept the settings for the room. Tap on " Back " to discard the settings.
Note
If a user activates a scene, the scene is only activated for those rooms that have been assigned to the user.
Example:
The Boost scene has been assigned to all rooms.
However only the "
Living room " and " Kitchen " are assigned to the user. If the user activates the "Boost" scene, the scene is only
activated for the " Living room " and " Kitchen ".