33
®
Link
Heat
2"
®
Heat
Link
2"
®
Heat
Link
2"
®
Heat
Link
1. Open the jaws (squeeze at the
points indicated in the diagram)
and position squarely around
the sleeve, then allow the jaws to
firmly grasp the sleeve.
2. Squeeze the trigger until the press
is complete.
3. Open the jaws and reposition them 90° from the first press.
90°
First Position
Second Position
2" Press Instructions; 2 Position Auto Press
{
{
Never press with empty jaws as this will damage the jaws.
{
{
Regularly check tool jaws and sleeve for any abnormalities that could be an indication of a
damaged tool.
{
{
If the Stainless Steel Sleeve is damaged or pressed incorrectly, both the fitting and the sleeve
must be replaced.
{
{
Never reuse stainless steel press sleeves.
