HD-T500 WIFI THERMOSTAT
1
/
4
HD-T500 Series Intelligent Heating Temperature Controller with weekly programming function,
it can be set six period times & the corresponding setting temperature per day. You also can choose
manual control or temporary control mode of operation. With the unique far-way control function,
simple operation, energy saving and environmental protection, this thermostat can be suitable for
electric heating equipment control and water system heating electric drive valve control.
1. Parameter
：
Voltage
：
220VAC
，
50/60HZ
Current
：
Imax16A
Power consumption
：
<1W
Control range
：
5
℃
~45
℃
Default temp. deviation
：
1
℃（
0.5~10
℃
adjustable
）
Limitation setting
：
20~60
℃
Accuracy
：
±1
℃
-5-50
℃
Sensor
：
NTC
IP Grade
：
IP20
2. Panel display:
3. Function
：
：
Manual mode: Control the device by manual
。
：
Program mode: It can be controlled automatically by the set time& temperatures (with six different time & related
temperature)
，
see below:
、
simultaneous display
：
For temporary control mode, press“ ”or“ ” will change to this mode, the device will comes out of
the temporarily current period time control, and come into the control of the manual mode, which also will automatically
return to the programming mode when the next period time comes.
：
Lock, Press the key“ ”&“ ”together for more than 5 seconds, the device locked, and press them for another 5 seconds, it
will unlock again.
：
Heating : Means for heating now.
。
Antifreezing,(See the details of advance setting 5), start the antifreezing function.
4. Button Functions
：
Power, ON/OFF by short press.
：
Mode, Short press for manual model& programmable mode change.
：
Clock, Short press for time setting.
：
minute
setting→ hour setting→ week setting. Press“ ”for next
parameter setting,
the twinkled data means to be set, press
“ ”or“ ”to setting and 10 seconds can be recorded after everything to be recorded.
：
Up, for increase the related parameters or adjust working mode.
：
Down, do decrease the related parameters or adjust the working mode.
Weekly Program:
Under P
ower on mode, press“ ” and “ ” for 5 seconds enter weekly programmable setting mode, press“ ”or“ ”for data
change, then press
“
”
to come to the next setting with the related sequenceas below:
Time(Period 1)
→Temperature(Period 1) Monday to Friday →…→Time(Period 6) → Temperature(Period 6) Sunday
