56
12' x 12' ROOF PANELS
PARTS REQUIRED:
7/16 x 48 x 96"
(1,1 x 121,9 x 243,8 cm)
x1
x4
2" (5,1 cm)
3/4" GAUGE
BLOCK
Roof panels may cause serious injury until securely fastened.
Note: Install all roof panels with the rough side up (painted grid lines).
Move to the opposite end.
Using the long edge of the panel as a lever,
move the panel side-to-side until the top corner
is flush to the peak
(Fig. B)
and there is a 1/2"
measurement on the gable end rafter
(Fig. C)
.
Secure panel with (2) 2" nails in the corners.
2
Place the
48" x 96"
panel on rafters with
a 3/4" measurement on the rafter
(Fig. A)
and the panel flush at the peak
(Fig. B)
.
Secure panel with (2) 2" nails in the corners.
48"
x 9
6"
3/4"
(1,9 cm)
Fig. A
Gauge Block
BEGIN
1
Flush at
peak
Fig. B
Two Nails
Flush at
peak
Fig. B
Move Gab
le
Two
Nails
1/2"
(1,2 cm)
Gable
End Rafter
Fig. C