Heartland 16826, Инструкция по сборке

Страница: 31 / 71

3/8 x 48 x 84-3/4"
(1 x 121,9 x 215,3 cm)
x1
3/8 x 42 x 96"
(1 x 106,7 x 243,8 cm)
x1
29
PARTS REQUIRED:
SIDE WALL PANELS
x12
1-1/2" (3,8 cm)
3/8 x 42 x 96"
(1 x 106,7 x 243,8 cm)
x1
3/8 x 48 x 84-3/4"
(1 x 121,9 x 215,3 cm)
x1
x3
2" (5,1 cm)
1-1/2 x 2-1/2 x 69" (3,8 x 6,3 x 175,3 cm)
x1
OO
Place
42 x 96"
panel primed side out onto OO
ledge board flush with front wall stud. Ensure 1" overhang
at
bottom of panel
. Secure panel with two 2" nails in the corners (Fig. A)
. Ensure the measurement between
the panel edges are the same along the entire length
(Fig. B) . Angle nails to hit floor frame (Fig. C)
.
Attach OO
as a support-ledge to to help install side wall panels. Measure down from floor 1" and mark.
Ensure OO
is level and centered. Secure to floor joist with two 3" screws.
Move to the top of panel. Using the long edge of the panel as a lever move the panel side-to-side until top of
panel is flush with front wall stud. Secure upper corner with (1) 1-1/2" nail into rafter (Fig. D) . Ensure 1" panel
overhang at bottom of panel
(Fig. D)
.
3
2
1
Fig. D
1-1/2" Nail
Flush
1"
(2,5 cm)
BEGIN
Fig. A
Fig. C
Fig. B
2" Nails
42"
(106,7 cm)
1"
(2,5 cm)
Primed
side out
Flush
Flush
Same
Measurement
3" (7,6 cm)
x2
1" (2,5 cm) 1" (2,5 cm)
TEMPORARY SUPPORT
3" Screws
LEVEL
OO
OO