#731152
| Ages 4+
Adult assembly and installation required.
Hang no more than 18" from ground.
Takes 1 adult 5 minutes to assemble.
Weight capacity: 175 lbs.
Installation:
1. We recommend hanging your HugglePod Lite from a stand, sold separately.
2. Indoor Installation: If hanging the HugglePod Lite from a ceiling, the suspension device must
be installed by a professional. For outdoor installation, use a Mega Tree Hanger (sold separately).
In both cases, suspend the seat no more than 18
"
from the ground when occupied. Ideally,
suspend HugglePod Lite over a soft surface such as grass, sand, wood chips, or carpet.
Care:
Spot clean only.
Safety and Assembly Instructions
In Case of Damage...
A Vinyl Plastic Repair Kit is included with your HugglePod. To use:
1. Thoroughly clean the damaged surface; allow to dry for a minimum of 10 minutes.
2. Cut a patch large enough to completely cover the hole or puncture.
3. Remove the paper backing from the patch.
4. Press the patch fi rmly over the hole or puncture.
5. Wait 20 minutes to infl ate.
Assembly:
1. Unpack the infl atable bladder and fl atten it out. Next, insert part of the bladder into
the pocket in the back of the bottom of the swing, leaving the valve exposed.
2. Slowly infl ate the bladder. When it is close to being fully infl ated, completely insert the cushion into
the bottom of the HugglePod. Finish infl ating when in place. Be careful not to over-infl ate the bladder!
If too full, it runs the risk of popping.
3. Cover the valve opening with your fi nger, then quickly insert the plug into
the valve opening. Press the closed valve into the bladder so it is fl ush with the surface.
Pump sold separately.
Carabiner
included for use in
installation
if needed.
HugglePod
®
Lite
#731152 Conforms to ASTM F963 Made in China. ©HearthSong
®
2020. Madison, VA 22727. 1-800-533-4397 HearthSong.com
731152_HugglePodLite_Instructions.indd 1
4/21/20 2:56 PM
