1
Hearth & Home Technologies • CFP Panel Installation Instructions • 2313-930 Rev. C • 6/18
ST36-CFP, ST48-CFP, ST60-CFP, ST72-CFP
Models: MEZZO36/48/60/72ST-B, CRAVE4836/6048/7260/8472ST-B, ECHEL36/48STIN,
MEZZO36/48/60/72ST, CRAVE4836/6048/7260/8472ST
Panel Installation Instructions
CAUTION! Risk of Cuts or Abrasions.
Wear protective
gloves and safety glasses during installation.
KIT COMPONENTS
• (1) Right Front Panel
• (1) Left Front Panel
• (1) Right Back Panel
• (1) Left Back Panel
Leave this manual with party responsible for use
and operation.
Figure 2. 36 in. Panel Identification
Note:
Only for use when CFT fronts are used
on both sides of the appliance.
Figure 1. 48, 60, 72 in. Panel Identification
RIGHT FRONT
LEFT FRONT
RIGHT BACK
LEFT BACK
RIGHT FRONT
LEFT FRONT
RIGHT BACK
LEFT BACK
Instructions
1. Remove door from the front side of the appliance.
Set door aside in a safe location, preferably a soft
surface such as carpet or cardboard.
Note:
The front side of the appliance is where the con-
trols are located.
2. Locate the Right Front panel. See Figure 1 or 2 (de-
pending on the appliance).
3. Bend the two short tabs outward 45 degrees. See
Figure 3 & 4.
Figure 3. Bend the Tabs 45 degrees
For Appliances:
48, 60 and 72 in.
For Appliances:
36 in.
RIGHT FRONT
BEND TABS 45 DEGREES
Note:
Example is 48, 60, 72 Panel
