1
Hearth & Home Technologies • Mesh Safety Barrier Instructions • 2012-699 Rev. D • 7/14
1ST BEND
2ND BEND
VELCRO
WARNING
HOT SURFACES
!
Glass and other surfaces are hot during
operation AND cool down.
Hot glass will cause burns.
•
DO NOT
touch glass until it is cooled
• NEVER allow children to touch glass
• Keep children away
• CAREFULLY SUPERVISE children in same room as
fi
replace.
• Alert children and adults to hazards of high temperatures.
High temperatures may ignite clothing or other
fl
ammable materials.
• Keep clothing, furniture, draperies and other
fl
ammable
materials away.
MESH-RETRO1928, MESH-RETRO2819, MESH-RETRO3028,
MESH-RETRO3121, MESH-RETRO3625, MESH-RETRO4226, MESH-RETRO2125
Mesh Safety Barrier Instructions
Leave this manual with party responsible for use
and operation.
This appliance has been supplied with an integral barrier
to prevent direct contact with the
fi
xed glass panel. DO
NOT operate the appliance with the barrier removed.
Contact your dealer or Hearth & Home Technologies if the
barrier is not present or help is needed to properly install one.
1. Bend two bottom brackets as shown in Figure 3.
Figure 1. Fireplace Front (Generic-Not a Speci
fi
c Model)
This kit has adjustable top brackets that are designed to
hook into the top louver assembly.
The top and bottom brackets will ship in a
fl
at position and
must be bent. See Figure 2. The brackets are intended to
be bent by hand, but a needle-nose pliers may also be used.
Figure 2. Mesh Bracket Locations
Figure 3. Bend Bottom Brackets
BENT
NOT BENT
TOP
BOTTOM
TOP LOUVER
BOTTOM LOUVER
HOOD
2. Bend top bracket as shown in Figure 4.
Figure 4. Bend Top Brackets
