
1
Hearth & Home Technologies • Trim Kit Instructions • 2115-951 Rev. E • 6/19
Leave this manual with party responsible for use
and operation.
550-TRIM3-BK-B, 550-TRIM4-BK-B,
750-TRIM3-BK-B, 750-TRIM4-BK-B
Installation & Operating Instructions
1. Remove parts from package and lay face down on
a non-abrasive, stable, flat surface. The upper and
lower J-Hooks and tabs must be straightened as
shown in Figure 2 and Figure 3 because they are
shipped flat. See Figure 5 for a visual reference and
measurements for each individual trim kit.
2. Connect the top, bottom, and sides by aligning the
holes on the left and right side pieces with the thread-
ed studs on the top and bottom pieces. The four-
piece trim kit is shown in Figure 1. When installing the
three-piece trim kit, align the top piece with the sides
in the same manner.
3. Secure the two nuts at each corner using a 3/8 in.
wrench or nut driver. See Figure 2.
Figure 1. Assemble Components - TRIM4 Shown
Figure 2. Location of J-Hook and Threaded Studs
4. Bend the tabs of the lower mounting brackets as
shown in Figure 3.
5. Hang trim kit on appliance by aligning upper J-Hooks
with top fireplace slots. Secure by pressing inward
and downward until trim kit sits firmly in place. Fast
-
ern lower corners with included sheet metal screws.
6. If the sides of the trim pieces appear to be bent inward
away from fireplace wrap sides, loosen hex nuts, re
-
move assembled trim piece and gently bend sides
outward slightly. While keeping the side trim pieces
pushed outward, replace and tighten the hex nuts.
7. Hang the firescreen decorative front on appliance.
See Figure 4.
Note:
If an overlap front is used, attach trim kit before
attaching door front mounting brackets. The front
will overlap the trim kit.
STRAIGHTEN
J-HOOKS AS
SHOWN
(BOTH SIDES)
THREADED
STUDS
CAUTION! Risk of Cuts or Abrasions.
Wear protective
gloves and safety glasses during installation.
DANGER
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS
.
A barrier designed to reduce the risk of
burns from the hot viewing glass is provided
with this appliance and shall be installed for
the protection of children and other at-risk
individuals.